Loading...
Loading...
.png)
The DELVO C Series Current Controlled Screwdriver is the utlimate controlled torque screwdriver. The current controlled motor allows for multiple torque setting programs; up to 30 different settings may be achieved in one single driver! (DLV45C / DCC0241X-AZ controller model). Substitute many drivers with a single unit, count the installed screws while maintaining specific torque and speed setting for each operation,you can even control the operation time/pulse! (DLV45C). Save time, space, money and avoid human error! Set-up the device either from a controller box (DLV04/10C) or from a software interface (DLV45C).
The DLV45C torque range goes from 0.6Nm up to 4.5Nm, and the turning speed from 100 to 1200 RPM
Current control allows precise torque by precise current flow monitoring, since current increases along the fastening process until the desire torque (which is related to the current amount increase) is reached. The DLV45C model comes with a built-in speed control function that combies the "quality of slow speed" and the "efficency of high speed".
The Upper/Lower time/pulse limit setting for the fastening time ensures that only correct installed screws are counted.
Also, the DLV45C allows 2 fastening modes, SOFT and HARD, which are related to the type of workpieces. SOFT mode is suitable for high-fastening loads as in tapping screws or soft joints (such as rubber). HARD mode is suitable for small fastening loads such as threaded holes or rigid unions (metals).
Fastening patterns are easely programmed with NITTO's dedicated software.
7 LED tip color indicator which can be coded to each channel, and/or for Count-Up (blue), NG-Fail (red) and OK-Pass (green) status.
CONSOLIDATE MANY OPERATIONS INTO ONE!
Set torque, speed and even time for several different screws into one tool.
BUILT-IN SCREW COUNTING FUNCTION
Prevent human error on repeating operations.
I/O CONNECTION FOR REMOTE CONTROL AND MONITORING
Several available signals for remote and automated operations.
| MODEL | TORQUE RANGE | SPEED RANGE | START METHOD | OTHER CHARACTERISTICS |
| DLV45C | 0.6~4.5Nm | 100~1200 RPM | PUSH OR LEVER | - Current controlled torque - ESD protection - For hand-held or automated - Nine speed settings available - Automatic three step speed control function - Time or Motor pulse measuring - Seven color indication LED (At the tip of the screwdriver) - I/O signal connection ports - Settings configuration via PC - Built-in screw counting function |
Av. Mina de Guadalupe 950-i, Parque Industrial Santa Fé IV, Puerto Interior, Silao, Guanajuato, México, C.P. 36275
info@yamazen.com.mx
+52 (472) 748 6400
Cambiar Idioma a: Español
.png)