Loading Loading...
Español | info@yamazen.com.mx | +52 (472) 748 6401

Pin and Thread Master Gauges for Metrology

EISEN is one of the leading manufacturer of precision master pin and thread gauging measuring devices manufacturer and calibration services provider. With a huge selection of gauging options, EISEN covers any and all necessities for metrology gauging verification.

THREAD GAUGE VIDEO

BALL GAUGE VIDEO

 

Main EISEN line-up: 

Master Pin Gauges: stainless steel, ceramic or tungsten carbide  pin gauges ranging from 0.22mm to 10mm in diameter, with a ±0.5μm ~ ±1μm tolerance, up to 0.3μm roundness, 0.15μm cylindricity and 0.05μmRa roughness, with 0.001mm steps available. Pin 'vises' are available for easy pin handling.

Limit Thread Gauges: stainless steel, ceramic or tungsten carbide one or two head thread plug and ring gauges; one-way thread plug gauges with clicking ratchet button; positioning Pos-T thread plugs for positioning; tappered pipe plug and ring gauges.

Plain gauges:  stainless steel, ceramic or tungsten carbide flat plug and ring gauges, exchangeable head plug gauges, round ball gauges, single-ended snap gauges, spline plugs and gauges.

Other gauging products: wire gauges, micrometer calibration pins, tappered pins.

Custom products and calibration systems: custom made solutions and other calibration services.

Features

HUGE VARIETY OF PRODUCTS

HUGE VARIETY OF PRODUCTS

EISEN provides many a huge range of gauge sizes and many options on materials and shapes.

Más ›
CUSTOM SOLUTIONS FOR CUSTOMERS

CUSTOM SOLUTIONS FOR CUSTOMERS

EISEN may create products with out-of-spec dimensions for special requierements

Más ›
TOP-OF-THE-LINE CALIBRATION SERVICES

TOP-OF-THE-LINE CALIBRATION SERVICES

EISEN may calibrate and certify your gauges to ensure your processe's accuracy.

Más ›

Products List

Metrology and Laboratory

EC/ECS Series Ceramic Pingauges (Master Pins - Cerámica)

EC/ECS Series Ceramic Pingauges (Master Pins - Cerámica)

The EC/ECS series of fine ceramics (zirconia) Pin Gauge Sets (31/51 pieces) provide thermal stable gauging pins with ±1μm / ±1.5μm tolerances and sizes from 0.2mm up tp 20mm.

DOWNLOAD THE CATALOG HERE

ET/EP/ECP/EX/FC Series Pingauges (Master Pins)

ET/EP/ECP/EX/FC Series Pingauges (Master Pins)

The ET/EP/ECP/EX Series Pingauges contain sets of 14(ET), 16, 31, 51 pin gauges with ±0.3μm(ET) / ±0.5μm (class 0) / ±1μm (class 1) tolerance for high precision measurements in micron units.

For the ET High-precision Pin Gauge Set Series, standard tolerances range from minus 3μm to plus 10μm increasing in 1μm increments. Custom sizes and combinations can also be made to meet according to customer needs. Sizes range from 0.297mm upt to 10.010mm.

The EP/ECP/EX Pin Gauge Set in different sizes from 0.05mm and increasing in 0.01mm increments, starting from 0.201mm up to 20mm.

FC Series starts at 20mm up to 50mm, all with screw holes for handles.

DOWLOAD THE CATALOG HERE / DOWNLOAD THE FC SERIES CATALOG HERE

Master Pingauge / Just-In-Set

Master Pingauge / Just-In-Set

MASTER PIN GAUGES have better tolerance, circularity, diameter variation and surface roughness compared to conventional gauges.

  • -> Tolerance ±0.5μm / Roundness 0.3μm /  Cylindricity 0.15μm / Rughness 0.05μmRa

JUST-IN-SET allows you to mix and match the pin gauges according to your purpose

DOWNLOAD CATALOG HERE